Conventional Fire Panels

Conventional Fire Panels

A complete range of conventional fire alarm panels from leading manufacturers. Such as C-TEC, Kentec, Fireline, and Gent

A conventional fire alarms panel, commonly known as a 'Four Wire System' has separate radial circuits (zones) for detection and sounders.

Conventional systems are one of the most commonly found in smaller properties both domestic and commercial, such as shops and restaurants.

The actual capital cost of the components tends to be less, although the actual installation cost in time and materials can be higher.

Working by dividing a building into a number of logical detection zones, with the detectors and call points within each zone hardwired on dedicated circuits to the control panel. Each zone can contain a number detectors or call points connected together on a fire proof cable. Each alarm sounder or bell needed is also wired on a specific sounder circuit.

If a detector is activated, the control panel identifies the circuit that contains the triggered device and so indicates the zone from which the fire alarm has originated, but the area then has to be manually searched to pinpoint the individual device.

The Squashni presents the many qualities of the Roshni in the form of a base sounder for use with almost any available fire detector. The flat deck area can also be used with beacons to provide a compact audio-visual alarm device with the added economy of a single installation point. The standard sounder does not include the cover plate Features...
The Squashni presents the many qualities of the Roshni in the form of a base sounder for use with almost any available fire detector. The flat deck...
£12.80
The Kentec Sigma CP range of fire alarms panels consists of 3 models, each of which is designed and manufactured in accordance with European standards BS EN54-2 and BS EN54-4 for fire detection and fire alarm systems, control and indicating equipment. The Sigma K11 series of conventional panels is where detectors and call points are wired on sep...
The Kentec Sigma CP range of fire alarms panels consists of 3 models, each of which is designed and manufactured in accordance with European standa...
£125.00
The Xenex range of conventional fire detection and alarm panels is a highly cost effective option for small building premises requiring coverage for up to eight zones. The Xenex panel contains integral power supply and battery standby for up to 72hrs. With up to eight alarm sounder circuits, repeat panel output, remote evacuation control and one...
The Xenex range of conventional fire detection and alarm panels is a highly cost effective option for small building premises requiring coverage fo...
£140.00
The Squashni presents the many qualities of the Roshni in the form of a base sounder for use with almost any available fire detector. The flat deck area can also be used with beacons to provide a compact audio-visual alarm device with the added economy of a single installation point. The cover plate is for use if there is no detector or other de...
The Squashni presents the many qualities of the Roshni in the form of a base sounder for use with almost any available fire detector. The flat deck...
£2.50
Fully compliant with EN54 parts 2 and 4, C-TEC's CFP conventional fire alarm panels offer an array of user and installer friendly features. Supplied in an attractive flush or surface mountable plastic enclosure each featuring four conventional sounder circuits, class change and alert inputs, two fire outputs, a fault output and a reset output. A...
Fully compliant with EN54 parts 2 and 4, C-TEC's CFP conventional fire alarm panels offer an array of user and installer friendly features. Supplie...
£109.00

1 – 5 products of 5