Conventional Fire Panels

Conventional Fire Panels

A complete range of conventional fire alarm panels from leading manufacturers. Such as C-TEC, Kentec, Fireline, and Gent

A conventional fire alarms panel, commonly known as a 'Four Wire System' has separate radial circuits (zones) for detection and sounders.

Conventional systems are one of the most commonly found in smaller properties both domestic and commercial, such as shops and restaurants.

The actual capital cost of the components tends to be less, although the actual installation cost in time and materials can be higher.

Working by dividing a building into a number of logical detection zones, with the detectors and call points within each zone hardwired on dedicated circuits to the control panel. Each zone can contain a number detectors or call points connected together on a fire proof cable. Each alarm sounder or bell needed is also wired on a specific sounder circuit.

If a detector is activated, the control panel identifies the circuit that contains the triggered device and so indicates the zone from which the fire alarm has originated, but the area then has to be manually searched to pinpoint the individual device.

The Kentec Sigma CP range of fire alarms panels consists of 3 models, each of which is designed and manufactured in accordance with European standards BS EN54-2 and BS EN54-4 for fire detection and fire alarm systems, control and indicating equipment. The Sigma K11 series of conventional panels is where detectors and call points are wired on sep...
The Kentec Sigma CP range of fire alarms panels consists of 3 models, each of which is designed and manufactured in accordance with European standa...
£144.50

1 product