Fire Alarm Manual Call Points

Fire Alarm Manual Call Points

A range of fire alarm manual call points from leading manufacturers such as Fike Safety Technology, Apollo, Hochiki, KAC, Cranford Controls and C-TEC.

Manual alarm call points are designed for the purpose of raising an alarm manually once verification of a fire or emergency condition exists, by operating the push button or break glass the alarm signal can be raised.

Manual Call Points should be located on escape routes and, in particular, at all storey exits and all exits to open air (whether or not the exits are specified fire exits), so that it is impossible to leave the storey or the building without passing a manual call point.

 

Twinflex Manual Call Point. Manual Call point with re-settable element reset key, back box, adaptor plate for flush mount and inbuilt ‘End of Line’ set by DIL switch.
Twinflex Manual Call Point. Manual Call point with re-settable element reset key, back box, adaptor plate for flush mount and inbuilt ‘End of Line’...
£14.50
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC MCP1A-R470SF call point has a 470 Ohm resistance and can be fitted as a flush or surface mount unit (when incorprated with SR backbox). Features Unique ‘Plug & Play’ installation concept Anti-tamper facility CPD Approved Flexible non-...
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC MCP1A-R470SF call point has a 470 Ohm r...
£7.77
The Sita addressable manual call point from Fike Safety Technology is designed specifically for use with the Duonet and Quadnet addressable fire alarm system. Feature LPCB Approved One piece moulding designed for surface or semi-flush mounting using plate privided Resettable element Larger connection cables allowing for easier termination when ...
The Sita addressable manual call point from Fike Safety Technology is designed specifically for use with the Duonet and Quadnet addressable fire al...
£26.75
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC SR is a standard back box for surface mounting manual call points in red. Features Specification
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC SR is a standard back box for surface m...
£0.98
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC MCP1A-R680SF call point has a 680 Ohm resistance and can be fitted as a flush or surface mount unit (when incorprated with SR backbox). Features Unique ‘Plug & Play’ installation concept Anti-tamper facility CPD Approved Flexible non-...
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC MCP1A-R680SF call point has a 680 Ohm r...
£7.77
The Apollo Series 65 break glass manual call point, consists of a 470 Ω resistor in series with a normally open switch contact. The manual call point helps reduce installation time as all the initial installation cabling is wired to a terminal block which connects neatly to the call point. Once activated, the manual call point can be reset by in...
The Apollo Series 65 break glass manual call point, consists of a 470 Ω resistor in series with a normally open switch contact. The manual call poi...
£12.50

1 – 6 products of 10