Manual Call Points (Break Glass)

A selection of manual fire alarms call points from leading manufacturers such as Fike Safety Technology, Apollo, C-TEC, Hochiki, STI, Cranford Controls, and many more.

Since 2017 it has been recommended as appropriate practice according to British Standards to fit a cover to all newly installed call points, and also where possible to retro-fit these.

It is important that you choose the appropriate call point for you fire alarm system and some are propriatory, such as the Twinflex. If in any doubt send us a picture of your existing fire alarm panel and a picture of the key hole, we will then match these for you if required.

Fike Twinflex Manual Call Point - A 2-wire manual call point, part of the Fike Twinflex family of products. Simple to install and can be set as flush or surface mount, with a resettable element and EOL (end of line) set via a switch within. It also has an active LED light.
Fike Twinflex Manual Call Point - A 2-wire manual call point, part of the Fike Twinflex family of products. Simple to install and can be set as flu...
£21.09
Fire alarm test key for newer style Apollo manual call points.  Available as a single key or pakl of 10.
Fire alarm test key for newer style Apollo manual call points.  Available as a single key or pakl of 10.
£1.20
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC SR is a standard back box for surface mounting manual call points in red. Features Specification
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC SR is a standard back box for surface m...
£0.98
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC MCP1A-R470SF call point has a 470 Ohm resistance and can be fitted as a flush or surface mount unit (when incorprated with SR backbox). Features Unique ‘Plug & Play’ installation concept Anti-tamper facility CPD Approved Flexible non-...
KAC are one of the world's leading manufacturers of a whole range of fire alarm manual call points. The KAC MCP1A-R470SF call point has a 470 Ohm r...
£7.77
The ID2 range of devices from Zeta includes the ID2-MCP & ID2-MCP/WP manual calls points.  These unique units mimic the feel of breaking glass whilst offering the user the cost benefits and environmental advantages of a re-settable operating element.  It is available as an outdoor weatherproof unit as well. The call point is addressed via a ...
The ID2 range of devices from Zeta includes the ID2-MCP & ID2-MCP/WP manual calls points.  These unique units mimic the feel of breaking glass ...
£16.25
The FireBrand FP3 is a unique conventional manual call point, with high visibility LED, and which includes both frangible and resettable windows. It also offers user friendly selection of the monitoring resistors, 470 and 680ohms and normally open contact. A CPR approved liftup cover is also available. Features Compatible with Firebrand panels ...
The FireBrand FP3 is a unique conventional manual call point, with high visibility LED, and which includes both frangible and resettable windows. I...
£8.20

1 – 6 produits de 10