Addressable Fire Alarm Equipment

Addressable Fire Alarm Equipment

A compleate range of addressable fire alarm equipment from leading brands such as Apollo, SenTri, Hochiki, Kentec, C-TEC, and Fike.

Addressable fire alarm systems consist of a central control panel, with a number of devices such as detectors, sounder, beacons, and manual call points, attached to a loop of cable, that starts at and terminates at the control panel.

Each device attached to the loop has a unique address, which can be programmed onto the device via a hand held programmer or via the central control panel. This address has a description that identifies the type of device and its location, enabling the exact detector that was triggered to be quickly identified via the panel display. This makes addressable fire alarm systems more appropriate for large buildings, such as hotels, care homes, schools and public buildings, and commercial premises that are more complex and spread over a wide area.

Fike Sita Addressable Manual Call Point Resettable Red Emergency 403-0006
Fike Sita Addressable Manual Call Point Resettable Red Emergency 403-0006
£24.84
The MI-PSE-S2 photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and development. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris. The plug-in unit uses sophisticated pro...
The MI-PSE-S2 photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and development. Thi...
£28.20
Hochiki YBN/R3 is a common analogue mounting base for addressable devies, and is fully compatible with Hochiki’s ESP range of smoke,heat, and multi-criteria sensors. It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required. Features Electronics free Stainless steel...
Hochiki YBN/R3 is a common analogue mounting base for addressable devies, and is fully compatible with Hochiki’s ESP range of smoke,heat, and multi...
£1.45
YBO-BS Hochiki Analogue Addressable Base Sounder Overview YBO-BS Hochiki Analogue Addressable Base Sounder is innovatively designed to give a range of tones and volumes with a maximum output of up to 98dB(A) (�2dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBO-R/SCI). Any q...
YBO-BS Hochiki Analogue Addressable Base Sounder Overview YBO-BS Hochiki Analogue Addressable Base Sounder is innovatively designed to give a range...
£25.47
Hochiki HCP-E(SCI) is a fire alarm manual call point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit has a bi-coloured LED, which can be selected as pulsing/non-pulsing for communications polling and is continuously lit when the HCP-E(SCI) is operated – in these two state...
Hochiki HCP-E(SCI) is a fire alarm manual call point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue ad...
£24.44
The Morley B501AP is an analogue addressable base plate for use with the Morley analogue addressable range of fire alarm system equipment. The Morley B501AP comes in a pure white colour.
The Morley B501AP is an analogue addressable base plate for use with the Morley analogue addressable range of fire alarm system equipment. The Morl...
£2.95

1 – 6 products of 8