Apollo Series 65 Conventional Heat Detectors

Weight:

SKU:

Barcode:

Collections: Detectors and Sensors

Product type: Detector

Vendor: Apollo

Tags: apollo, detector, heat

Availability:

Description

The overall Apollo range of conventional detectors consists of 12 models, incorporating both smoke and heat detection. Within this range there are heat detectors that monitor fixed heat and rate-of-rise.

They monitor temperature through the use of advanced dual thermistor technology which works by providing a voltage output proportional to the external air temperature.

Each detector in the range is designed to suit a wide variety of applications and operating conditions. They can easily be used as replacements for the earlier Series 60 models. With such a wide operating voltage range they can be integrated on to security systems when used with the 12 volt relay base (45681-508).

A1R, BR and CR are Rate of Rise detectors, designed to detect a fire as the temperature increases, but they also have a fixed upper limit at which the detector will go into alarm if the rate of temperature increase has been too slow to trigger the detector earlier.

CS model detectors are of a fixed heat, high temperature, and is also available with a option of LED which flashes when the detector is in a quiescent state. Also, a magnetic test switch and Flashing LED. The magnetic test switch in the circuit of the detector can be magnetically activated from outside the case to initiate an alarm condition for test and commissioning purposes

Features

Model CS 55000-137

  • Fixed Temperature 90 degrees C
  • Dual thermistor technology
  • Approved EN54–5:2000

Model AIR 55000-122

  • Rate of rise trigger temperature 55 degrees C
  • Dual thermistor technology
  • Approved EN54–5:2000

Model BR 55000-127

  • Rate of rise trigger temperature 75 degrees C
  • Dual thermistor technology
  • Approved EN54–5:2000

Model CR 55000-132

  • Rate of rise trigger temperature 90 degrees C
  • Dual thermistor technology
  • Approved EN54–5:2000

Specification

  • CE approved 0837
  • Supply voltage 9-33Vdc
  • IP rated 23D
  • Weight 80g
  • Alarm indicator red diode
  • White polycarbonate housing
  • Warranty 10 years

Datasheets

Apollo Series 65 Heat Detectors