Fike Twinflex Pro2 Fire Alarm Kit




Collections: Fike Twinflex Fire Alarms, Fire Alarm Systems

Product type: Okänd typ

Vendor: n/a



The new Fike Twinflex Pro2 two wire fire alarm system incorporates the market leading Multipoint combined smoke and heat detectors with built-in sounders, allowing the whole system to be easily installed using a fire proof cable that only has two 1.5mm cores and an earth.

This significantly reduces the cost of cable and the time and effort to install it

the system also incorporates Checkpoint Technology, which assists the reduction of false alarms through inadvertant activation. This is invaluable when installing a system in a House Of Multiple Occupation (HMO), or large domestic premises, and commercial premises. The system has recently become an approved solution for fire detection by The National Landlords Association.




Using the Multipoint detector as part of the TWINFLEX two wire fire alarm system means that when a detector is wired to the system, a sounder can also be connected without extra installation time or cost. This greatly reduces the number of points that need to be installed and the time it takes to install. As Multipoint offers 7 different modes of detection, the installation is made even simpler since one device suits all applications. Whatever type of detection is required, it can be selected by the flick of a switch at the time of commissioning - 3 different smoke modes, 2 fixed temperature heat modes, a rate of rise mode and a combination smoke or heat mode.

Each kit contains

  • 1 off Twinflex Pro2 control panel
  • 6 off ASD Multipoint Detectors including sounders 204- 0001
  • 1 off ASD Multipoint Detector including sounder and beacon 204-0012
  • 2 off Manual Call Points 402-0006
  • 1 off Detector Head RemovalTool 25-0046-201
  • 1 off Fire alarm log book
  • 1 off Can of detector test smoke

You can add further items to the base kit as required, all of which are here on our web site

  • Simple two Wire system providing cost savings of up to 40%
  • Complete range of compatible devices making specification simpler
  • Constructed to comply with BS5839 Part1: 2017 and European EN54 standards
  • LPCB Approved
  • Easy to install
  • Multipoint saves the cost of additional sounder circuit
  • Supports avoidance of false alarm callouts


  • Configuration can be downloaded via firmware
  • Call point identification
  • Built-in end-of-line all devices - No resistors or extra circuits are required
  • 7 modes of detection
  • Up to 32 devices per zone
  • Extended back up battery capacity in newer Pro2 - up to 7Ah with additional battery holder

Next Product →

Customer Reviews View on Amazon

  out of 5 stars

5 star
4 star
3 star
2 star
1 star