Addressable Fire Alarm Panels

One of the latest panels from Kentec, the Syncro Lite AS (LA80161M2 ) is a single loop analogue addressable fire control panel. The AS Syncro Lite ...

One of the latest panels from Kentec, the Syncro Lite AS (LH80161M2 ) is a single loop analogue addressable fire control panel. The AS Syncro Lite ...

The MXM-503 is a semi-flush bezel for large enclosure Advanced MxPro5 panels. All bezels are provided complete with fitting kit for a quick and eas...

The ipGateway connects to an existing Ad-Net fire panel network, and provides a gateway to the network from any remote location over the internet. ...

The MXP-511 from the Advanced range is an access enable key switch which has been designed for the MxPro 5 range.

The Ad-NeT network system allows all MxPro5 series control panels, remote terminals and network peripherals to be connected together using standard...

The Advanced MXP-002 loop driver card is designed to expand the loop capacity of the MxPro 4 MX-4400/4200 series of addressable fire alarm panels.D...

Advanced Electronics Loop Driver Card that combines 3 protocols, Apollo, Hochiki, and Argusb Vega.The MXP-502 Loop Driver Card is designed for use ...

Retro-fit replacement zone LED module for MX-4100 range of panels. The Zonal LED indicator cards are a range of panel mounted peripheral modules th...

The MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 on-board sounder circuits, 20 programmable zonal LEDs with slide-in la...

The MxPro 5 series is fully expandable from 2 to 8 loops and supplied with 8 on-board sounder circuits, 20 programmable Zonal LEDs with slide-in la...

The Advanced MX-5101L is a 1 loop analogue addressable fire alarm control panel. This panel supports both Apollo & Hochiki analogue addressable...

20 programmable Zonal / 25 System LEDs. Apollo, Argus Vega, Hochiki & Nittan Evolution protocol support. Advanced graphical LCD us...

The MxPro 4 series is fully expandable from 1 to 4 loops complete with 4 on-board sounder circuits. The control panel consists of a simple to use L...

Advanced 1-4 Loop MxPro5 Fire Control Panel with 1 Loop Card MX-5401 (Apollo / Hochiki Protocol) The MxPro 5 series is fully expandable from 1 to 4...

The MxPro 5 series control panels are fully expandable from 1 - 2 loops and supplied with 2 on-board sounder circuits, 20 programmable zonal LEDs w...

The MxPro 5 series control panels are fully expandable from 1 - 2 loops and supplied with 2 on-board sounder circuits, 20 programmable zonal LEDs w...

The Advanced MX-5201L is a 1 - 2 loop analogue addressable fire alarm control panel. Supplied with 1 loop card. This panel supports both Apollo &am...

The DIN-Rail Zone Monitor with Isolator powers and controls a zone of up to 20 Apollo Series 65 or Orbis fire detectors in a Discovery or XP95 loop.

The DIN-Rail Mains Input/Output Unit provides a mains-rated voltage-free, single pole change-over relay output and a monitored switch input. The un...

DIN-Rail Interface Enclosures are available in two sizes and can be used for housing intrinsically safe IS barriers or DIN-Rail mounted interfaces....

'The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.'

The Intelligent DIN-Rail Input/Output Unit provides supervision of one or more normally open volt free contacts connected to a single pair of cable...

The MxPro 5 series control panels are fully expandable from 1 - 2 loops and supplied with 2 on-board sounder circuits, 20 programmable zonal LEDs w...