Apollo

Product Features Manufacturer : Apollo Part Number : 45681-210 Apollo XP95 & Discovery Detector Base Supplied Complete With Xpert Card For De...

The XP95 Open-Area Multi-Tone Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system.Product Features Manu...

The Series 65 standard mouting base designed for use with conventional Apollo detectors. TThe Series 65 Standard Base has been designed to enable d...

The Series 65 Diode Base is designed for use with conventional Apollo detectors. The base is fitted with a Schottky Diode for monitoring of head re...

The Series 65 Sav-Wire Base, 45681-206, is designed to allow Series 65 detectors to be used in ‘Sav-Wire’ detection and alarm systems and can only ...

Apollo 45681-508 Series 65 Detector Base - Relay (12V). A version of the standard Series 65 detector mounting base, but including a relay that ope...

A universal XPERT card which allows you to use the same card on both XPERT 7 and XPERT 8 bases. Allows installation in all base types, meaning ...

The Apollo Series 65 Optical Smoke Detector detects smoke using an internal pulsing LED and a photo-diode at an obtuse angle. In clear conditions, ...

AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires, making installat...

The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke ...

Compatible with all AlarmSense fire detectors. Includes on-board 'removAlert' circuitry that detects the removal of an AlarmSense detector and repo...

The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector also has the ability to monitor and discard transient s...

The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector also has the ability to monitor and discard transient s...

Apollo AlarmSense Manual Call Point 55400-894APO. The Apollo Manual Call Point has been designed to operate on an AlarmSense two-wire system. An al...

Apollo AlarmSense is a family of products that have 2-Wire connections and designed for use with compatible 2-Wire fire alarm panelsIt is fitted wi...

The base is designed to be used with AlarmSense systems only. It is supplied with a low or high volume setting and red or white caps are available ...

The Conventional Manual Call Point has been designed to operate on a zone of conventional fire detection devices. An alarm is initiated by pressing...

The Discovery Optical Smoke Detector operates using the light scatter principle and is ideal for applications where slow-burning or smouldering fir...

The Discovery Sounder Visual Indicator Base uses the Discovery Protocol and is appropriate for use with the entire Discovery detector head range. F...

The Loop Powered VAD is designed for indoor use. The Category C VAD is specifically designed for use on a ceiling and comes in two different covera...

DIN-Rail Interface Enclosures are available in two sizes and can be used for housing intrinsically safe IS barriers or DIN-Rail mounted interfaces....

The Intelligent DIN-Rail Input/Output Unit provides supervision of one or more normally open volt free contacts connected to a single pair of cable...

The Soteria Optical Smoke Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber. PureLight marks...

The DIN-Rail Mains Input/Output Unit provides a mains-rated voltage-free, single pole change-over relay output and a monitored switch input. The un...

The DIN-Rail Zone Monitor with Isolator powers and controls a zone of up to 20 Apollo Series 65 or Orbis fire detectors in a Discovery or XP95 loop.

The Isolating Base senses and detects short-circuit faults on Discovery loops and spurs. Minimises dispruption from short circuits. Key Features ...

'The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.'

The Apollo Multi-Tone Open-Area Sounder Visual Indicator is designed for use in indoor open areas and can be connected to any Discovery or XP95 sys...

The Apollo Series 65 break glass manual call point, consists of a 470 Ω resistor in series with a normally open switch contact. The manual call poi...

The Series 65 Auxiliary Relay base provides Two sets of volt-free changeover contacts to facilitate the Switching of a remote LED or other auxiliar...

The base provides one set of volt-free, changeover (form C) contacts that change state when the detector signals an alarm. Key Features Det...

The Soteria Dimension Mounting Box is moulded from white flame-retardant polycarbonate. Positions for either side or top cable entry are marked on ...

The XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to sig...

The XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to sig...

Leading brand Apollo. The XP95 Optical Smoke detector uses an internal pulsing infrared LED and a photo-diode at an obtuse angle. In clear air cond...

The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air tempe...

The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air tempe...

High heat detection, the XP95 heat detector monitors temperature by using a single thermistor which provides a count output proportional to the ext...

This product is subject to special to order - No Returns Are Accepted The XP95 IS Heat Detector is distinguishable from XP95 IS smoke detectors by ...

The Apollo XP95 manual call point is supplied with a short circuit isolator, resettable element and a surface mounting back box as standard. A sing...

The Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent Mounting Base. It is used to ...

FA26 - APOLLO HEAT DETECTOR CLASS A1R WITH SOUNDER BEACON BASE W/ DUAL LEDS

Simple clip on, tough polycarbonate call point cover model FA56A. Ideal for protecting the call point and preventing accidental activation and hen...

A Series 65 optical smoke detector with flashing LED's. The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing ...

A Series 65 optical smoke detector with flashing LED's. The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing ...

The VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. ...

The Loop Powered VAD is designed for indoor use. The Category C VAD is specifically designed for use on a ceiling and comes in two different covera...